Thorough. Honest. Fair.


Sex Toy Reviews for Experimental Fuckers #9

Glow-in-the-Dark Clone-A-Willy Vibrating Dildo Kit

This review contains affiliate links.

Empire Labs started out making products for medical and prosthetic use before Hollywood realized that they could make detailed, lifelike props and use the same process for creating special effects in horror movies. Empire Labs is the manufacturer of the Make Your Own Dildo kit, Clone-A-Pussy Labia Casting Kit, and Clone-A-Willy Kit. Mike at The Play Pages contacted me about writing a review, and I chose to review the Glow-in-the-Dark Clone-A-Willy Vibrating Dildo Kit. The Clone-A-Willy Kit is available in three realistic flesh tones as well as a small variety of additional and more novel colors like neon pink. Empire Labs even offers soap, candle, and edible chocolate versions of the Clone-A-Willy Kit. The Make Your Own Dildo kit makes a penis replica dildo with testicles while the Clone-A-Willy Kit makes a penis replica dildo without testicles. I’m reviewing the Clone-A-Willy Kit, so my dildo doesn’t have balls. I’m not sure I understand the goal of their Clone-A-Pussy Labia Casting Kit because it doesn’t make a sex toy. It’s not a stroker or masturbator; it’s just a cast of the external vulva. I’m not sure how one would masturbate with it. However, the Clone-A-Willy Kit makes either a vibrating or non-vibrating penis replica dildo.

     The Play Pages is a Palm Island Inc. Web site. Palm Island Inc. sells sex toys and offers services like marketing assistance for people looking to create their own store site. They offer erotic audio recordings and plan to add adult web cam services. The Play Pages has more than 1,700 items and a rotating inventory, so it’s likely that new items will appear with each visit to their site. They provide free shipping with orders over $50 and discreet billing. Returning customers get 10% off with a valid e-mail address, and because The Play Pages is a reseller, their prices are comparable to PinkCherry’s. Follow The Play Pages on Twitter.

     The Clone-A-Willy Kit packaging is a plastic tube, which later contains the mold. The packaging isn’t at all discreet if someone reads the large text that says, “CLONE-A-WILLY Kit.” There’s a cartoon couple on the package.

WP_000646

     The Kit includes many – but not all – of the items necessary to make a penis replica vibrator. I found detailed instructions, molding powder, a jar of liquid skin, a jar of liquid rubber, a plastic vibrator, and glow powder in my Kit. The Kit should include a thermometer and a stir stick, but I didn’t receive those items. Honestly, I could have contacted Mike about the missing pieces of my Clone-A-Willy Kit, but I didn’t because it wasn’t a big deal to me. I have a thermometer I can use, and I just used a wooden spoon instead of the stir stick.

WP_000651 WP_000650

     In addition to the Kit, I needed a Sharpie, a pair of scissors, duct tape, a large measuring cup, a large mixing bowl, a timer or a stopwatch, a small square of cardboard, water, and (obviously) my fiancé’s penis. Collect and set up the items ahead of time and be prepared because portions of this process are time-sensitive.

     To make a replica vibrator from my fiancé’s penis, I asked him to measure the length of his erect penis against the tube and draw a line with the Sharpie on the tube where his penis ends. I cut the open end of the tube at the Sharpie line and put tape over the cut end of the tube to cover any sharp edges left by the scissors. I used whatever tape I could find, the instructions recommend duct tape because it’s thick. The tape I used didn’t protect my fiancé from getting poked by the cut end of the tube. My fiancé’s penis is straight, but the instructions explain how to rig the tube for a guy with a curved penis. I knew it was important for the next few steps to go well because this part of the process is time-sensitive. I had to get the water to the right temperature – 98 degrees.

WP_000735

     Accuracy is important when it comes to the temperature of the water because it affects the timing of the next steps. I had two minutes to mix the water and molding powder together, pour the mixture into the tube, and get my fiancé’s penis in the tube before the mixture started to gel. I learned from reading a review written by Ali that stirring the mixture for about one minute and then getting my fiancé’s penis into the tube was probably the best course of action. I’d say that her review was the most helpful, and I benefited from the wisdom of her experience.

     The instructions say that the molding powder (also called “sodium alginate impression material” in the instructions) is non-toxic, silica-free, hypoallergenic, and contains no harmful ingredients. The molding powder contains sodium alginate, tetrasodium pyrophosphate, cellulose, and calcium sulfate. Sodium alginate comes from brown seaweed and is an ingredient in flavorless gum and foods like yogurt and cheese. Tetrasodium pyrophosphate is about twice as toxic as table salt. It is found in health and beauty products like toothpaste and dental floss for tartar control as well as household detergents and even foods like marshmallows and pudding. Cellulose comes from plants, and calcium sulfate appears in nature as gypsum, which is the main ingredient in plaster of Paris. It’s also used in foods like tofu.

     Communication between my fiancé and I was incredibly important when it came to the time-sensitive steps going well, and I would say that our communication was lacking when we attempted this project. I had wanted to try the Clone-A-Willy Kit since I received it back in February, so I had been bugging him for quite some time, and it ended up being put off more than once because he got sick, I got sick, and we don’t live alone, so we had to find a time when everyone else would be out of the house. Obviously, privacy is necessary to do this project. Honestly, when we finally decided to try it, I think neither of us was in the best mood. I felt annoyed because I had to keep nagging him about it, and he was probably irritated by my nagging¹. Anyway, it’s important to decide in advance where to do it. I needed warm water for the mixture, so I thought we’d do it in the bathroom because the floor also would be easy to clean if we spilled the mixture while putting his penis in the tube, but he seemed to think we were doing it upstairs in our bedroom, which is where the computer is, so he’d be able to watch some porn to get hard, but it’s carpeted. Another important factor to consider is how he will get and stay hard. My fiancé and I didn’t discuss this factor ahead of time, so I didn’t know whether he wanted to watch porn or have me assist him, and the situation ended up being a bit awkward. Figure out how he will get hard, how long that will take, and how he will stay hard for the next few minutes before mixing the molding powder and water. I thought he’d watch porn, but he didn’t seem comfortable doing it with me in the room, and I felt like I was waiting around for him to figure out what he was doing. Maybe bringing a laptop into the bathroom would have helped. We ended up in the bathroom with the water running while I took off my clothes, and he entered me from behind while I leaned over the sink and used the thermometer to get the water to 98 degrees. He tried thrusting a little to stay hard while I mixed the molding powder and water, and I used a stopwatch app on my cell phone to keep track of the two minutes. As I said, it was awkward, and there was a lot going on. He ended up pulling out of me in a hurry before the mixture was ready because he thought he was going to cum. I think pulling out interrupted his orgasm because he said that some cum leaked out, but it didn’t seem to me like he had experienced a full release. He wasn’t has hard as he could have been by the time we inserted his penis into the tube, so our mold wasn’t fantastic. I’m not the one who was trying to stay hard against the clock, but I can imagine that the timing likely caused him some performance anxiety as well. None of these things were the fault of the Kit, so in fairness, I stress again that clear communication is paramount to successfully executing the instructions. I also was way too worried about the difficulty of the time-sensitive steps. It wasn’t difficult at all to mix the molding powder and water and get his penis into the tube within two minutes.

     I recommend doing this project in either the bathroom or the kitchen because it’s somewhat messy. The mixture is likely to run out of the tube as he inserts his penis. It dripped down my fiancé’s balls as well as getting all over his hands and mine. Put down some newspaper or a garbage bag on the floor to make cleaning up easier. Honestly, once the mixture gels and he pulls out of the tube, the material isn’t difficult to clean up. What was left in the bowl dried and flaked right off, and I washed the bowl in the dishwasher.

WP_000739 WP_000740 WP_000743 WP_000742

     The material on my fiancé’s skin turned into a flexible putty and came off pretty easily, and he cleaned himself with a wet wipe or wash cloth, but I’d recommend that he shave or at least trim his pubic hair short so that the material doesn’t get stuck in his hair. Rubbing in some petroleum jelly or lube is another option if he doesn’t want to shave or trim his hair. Another avoidable issue we experienced was how uncomfortable the cut end of the tube felt against his skin. I should have used duct tape, but he also had literally just shaved beforehand, and when I pulled the tube off his penis, I saw red dots of blood around the top of the mold, so he might want to prepare a day or two in advance when it comes to shaving or trimming his hair so that he doesn’t have such sensitive skin when doing the project.

     Once the mixture gelled, he pulled out of the tube, leaving the mold inside it. After we made the mold, it had to sit for two to four hours before I could use the liquid skin and liquid rubber to make the replica. I checked the mold and poured out the water that had collected at the bottom. Then, I mixed the liquid skin, liquid rubber, and glow powder together and poured the mixture into the mold. The instructions say to make this mixture in a disposable container. I cut slits in the cardboard square and slid the vibrator through until only the cap was still sticking out and lowered the vibrator into the mixture with the cardboard resting on top of the tube. The tube needs to sit this way for 24 hours. After a full 24 hours, remove the replica from the mold. Our replica ended up having air bubbles in it, which likely happened because there was too much water in the mold, so I’ll let the mold dry for a longer period of time when I try this project again.

DSC05154

     I also pushed the vibrator too far into the tube. Not only does the tip stick out of the head of our replica, but also the cardboard stuck to the mixture, and I can’t get it off.

DSC05139 DSC05160 DSC05159

     The other materials also contain no harmful ingredients. The liquid rubber (also called “silicone rubber base” in the instructions) and the liquid skin (also called “silicone rubber catalyst” and “platinum cure” in the instructions) both contain polydimethylsiloxane, which is a type of silicone oil that is clear, inert, non-toxic, and non-flammable. It is found in shampoo and food as well as used in Rain-X for its water-repelling properties. It is present in over-the-counter drugs and treats head lice. The glow powder (also called “phosphorescent pigment” in the instructions) contains copper-doped zinc sulfide, which is a common and widely used pigment. The vibrator is hard plastic and powered by one AA battery, which is not included in the Clone-A-Willy Kit.

DSC05147

     I have issues with this vibrator. It has only one speed, so it’s weak, and the vibrations are buzzy and concentrated at the tip. Once inside the replica, the vibrations are obviously even weaker because they now have to travel through the material. To turn the vibrator off, I have to completely remove the battery, which means unscrewing and replacing the cap several times during one use of the toy. I hope the cap doesn’t break from excessive use. However, I have to say that the battery doesn’t fall out when the cap is off. Use a different, more powerful vibrator to upgrade the Clone-A-Willy Kit. Just be sure that it’s made of hard plastic to transfer the vibrations best. This toy isn’t waterproof because there is no ring to make a seal with the vibrator’s cap. However, non-vibrating replicas are waterproof.

DSC05151

     While I’m not going to post a photo of my fiancé’s penis, I can say that our dildo is relatively accurate. The head is the right shape with a pronounced ridge, and the texture is right. I can see the wrinkle lines on the head clearly.

DSC05141

     The shaft even has some slightly raised veins for texture, and the underside of the shaft is almost perfect except for the part where his head was against the side of the tube. As I said, he also wasn’t as hard as he could have been, and that’s certainly partially my fault. Our dildo even ended up having a base, so I can use it anally, and it’s pretty glowy. I actually didn’t want the glow-in-the-dark Kit in the beginning, but The Play Pages didn’t have the Clone-A-Willy Kit that I wanted in stock, so this one was my second choice. I think we would have had more fun making a vibrating replica of my fiancé’s penis if a few things had been different. I plan to give the Clone-A-Willy Kit another shot, and we know now that we need to communicate better. I’ll tell him to shave or trim his pubic hair a day or two before we attempt this project again, and we’ll discuss how he’ll get and stay hard and where we’ll do it. Maybe I’ll buy a good cock ring before we try again. Now that we know what to expect, I hope our replica turns out better next time. Again, the fault isn’t necessarily with the Kit, and I’m sure we can do better. Our dildo isn’t terrible, but he could have been harder, and I need to make sure the vibrator stays inside the dildo. I honestly don’t need the toy to vibrate, so I’ll probably make a non-vibrating replica next time.

DSC05136 DSC05137 DSC05135 DSC05138

Pros:

  • The materials that aren’t easy to find around the house are in the Kit.
  • The instructions are clear and easy to follow.
  • The Clone-A-Willy Kit makes an accurate replica.
  • A doctor designed the Clone-A-Willy Kit.
  • Empire Labs offers a variety of items like the Clone-A-Willy Kit and several different Clone-A-Willy Kits that make replicas from novel materials.
  • The process is pretty simple, and the materials are phthalate- and latex-free. The “finished dildo is made from a proprietary skin-like substance that is not latex or silicone, but a completely safe, [nonporous] rubber material that is…being used throughout Hollywood to create incredibly lifelike masks,” according to this product description.
  • Both water- and silicone-based lubricants are compatible with this toy. I’ve used Uberlube, which is silicone-based, without having any issues.
  • Rub in some petroleum jelly or lube if he doesn’t want to shave or trim his pubic hair.
  • This toy is easily cleaned with soap and water, and non-vibrating replicas are waterproof.
  • This project won’t break the bank. SheVibe sells the Glow-in-the-Dark Clone-A-Willy Vibrating Dildo Kit for under $40. Plus, refill packages of the materials are available if the replica doesn’t turn out as expected.
  • The Clone-A-Willy Kit is perfect for couples in long-distance relationships.

Cons:

  • My Kit was missing the thermometer and the stir stick.
  • The tips are really more like instructions, and I’d treat them that way so that the replica ends up being as accurate as possible.
  • Clear communication is paramount for successful completion of this project.
  • Be prepared with all of the necessary materials before beginning this project. I can see how the time-sensitive steps might cause performance anxiety, especially if there’s a scramble for an item that was forgotten.
  • This project is a bit messy. It’s a good idea to do this project in the bathroom or the kitchen or somewhere else that isn’t carpeted.
  • This project is best tackled by a couple. Trying to get through the process alone definitely would be more difficult.
  • This toy isn’t waterproof because of the vibrator and requires careful cleaning.
  • The vibrator has only one speed. The vibrations are weak, buzzy, and concentrated in the tip. To turn the vibrator off, remove the battery.

Rating:  7.5²/10

¹If he would do what I ask the first time I ask him to do it, then I wouldn’t have to nag him for weeks.

²After agonizing over rating this toy, I consulted my fiancé, and we agreed that this rating is appropriate because the Kit is well designed. Everything that either is vital to doing the project or might be difficult to find around the house is in the Kit. Because the tube that contains the Kit is the tube for making the mold and the product label has the instructions on the back, there are no wasted materials. It’s a solid toy, and the reasons why our replica may not have turned out exactly as we had hoped have nothing to do with the Kit and everything to do with user error.

Comments on: "Glow-in-the-Dark Clone-A-Willy Vibrating Dildo Kit." (34)

  1. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  2. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  3. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  4. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  5. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  6. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  7. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  8. Super detailed review. I enjoyed reading about your experience making the kit. It’s quite a challenging process! Thanks for the link back to my own review, appreciate it🙂

    Like

    • Thank you so much for stopping by to read my review, Ali! You’re right that it’s a challenging process. It’s difficult to follow the steps while he stays ready. You’re welcome for my link to your review. Yours really was the most helpful review I found before attempting to make the dildo with my fiance. I totally wasn’t just saying that. I’m glad it prepared me for what I was getting us into.

      Like

  9. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  10. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  11. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  12. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  13. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  14. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  15. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  16. […] Icicles No. 17 -by BlissfullyOrgasmic Pipedream Icicles No. 24 -by Slutty Girl Problems Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam Tantus Acute -by Danaë Spartacus 8 Inch -by BlissfullyOrgasmic Pleasure Works […]

    Like

  17. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  18. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  19. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  20. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  21. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  22. This is a great review! I really appreciate all the info you give about the materials in the kit. Cheers!

    Like

    • Thank you so much for commenting on my review, Kate! I was really pleased that the Clone-A-Willy Kit packaging lists the ingredients in their proprietary materials. It would likely be next to impossible to find out otherwise. It’s wonderful that Empire Labs is so transparent, especially in the largely unregulated sex toy industry.

      Like

  23. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  24. […] Glow-in-the-Dark Clone-A-Willy Kit -by Inquisitive Clam […]

    Like

  25. Saskue78 said:

    I am pleased to hear came out fairly ok despite the poor planing of the operation willy clone. If you try this again I would suggest letting him handle the cock moulding operation as the mould might come out better as he will no better when to start moulding his cock. After all one the mould is done you should be able to keep trying the other steps until you get get a willy to set well.

    Am not sure if you can pick up the alginate moulding separately or not s its a the same as what they use at the dentist. I f you can then try as many time as you like until out get the perfect mould. THen if you can get access to a vacuum former you can make a better mould by vacuum forming around your maters casting. Then this will also give you more flexibility for future casts should you need make another.🙂

    Hope you have put his clone willy to good use already.😉 hehe xxxxx

    Like

    • It turned out alright, Saskue. I would like to try again and see if we can communicate more clearly. Maybe you’re right that things would go more smoothly if he mixed the molding powder while I was more involved in getting him hard. We’ll have to switch roles next time. Once we make a good mold, we could probably use it more than once if we had the dildo materials. I’m not sure if it’s the same stuff the dentist uses. Once it dries, it cannot be reused or remolded into a different shape. However, there are Clone-A-Willy Kit refills, and you can buy extra molding powder and other materials. The only problem is that you don’t get a tube with the refills, so you have to find a container to make the mold in. You also don’t get a set of instructions, so you should know what you’re doing or keep the original instructions. Basically, you only get the materials and none of the tools (no thermometer, stir stick, etc.).

      Like

      • Saskue78 said:

        Keeping the instructions would be a good idea. Although I think most of the instruction apply to this kit method only. however create the mould of his cock could I think be better way to make the initial mould casting Well yes you would need something to make the mould in. However still believe there is a better method making your initial mould although there are some crucial items in the kit if out want to make a vibrating toy. Pleased it turn out ok though.🙂 I also hope you have out it to use already. hehe😉 xxxx

        Like

      • I have had a chance to use this dildo, and it’s alright. It’s not amazingly fantastic, and the vibrator is pretty much useless, so I think I’ll make a non-vibrating replica next time. However, the point of the Clone-A-Willy Kit is to make a clone of your lover’s penis, so the shape and texture are really the most important parts, IMO. The shape and texture of my dildo are definitely good, and it looks like my fiance’s penis, but the replica turned out too hard. It’s not squishy like a real penis, and I would like it if I could make a softer version.

        Like

      • Saskue78 said:

        Um! getting the right consistency of a real penis would be hard with the the stuff you get in the kit as i think it will always set to hard.😦 Also the only way to achieve a realistic would be to use the silicon they use for making those high end sexy dolls or fake bodies in tv shows and fake limbs for amputees. lol

        it is a sham the vibrator is not very good but if they used a better one in the kit it would be more expensive. At least the shape came right. If you do make a static non vibrating version would suggest trying with a fuck machine either one you sit on and ride or one that does thrusting action. Also you might want to give it a suction cup end so you can attach it in the show and play with it that way.😉 xxxxxx

        Like

      • Definitely some good suggestions, Saskue. You could always buy a better vibrator separately to use instead of the one they give you in the Kit, but you’re right that a better vibe in the Kit to begin with would likely mean you’d pay more. I’m not sure how difficult it would be to add a suction cup, but making a fucking machine with the dildo probably wouldn’t be too hard.

        Like

      • Saskue78 said:

        Pleased you like my suggestions babe. Hope your week is gonig great.🙂 xxxxx

        Like

What do you think?

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Tag Cloud

DevianttKitten

Dildo Fiend and Orgasm Avenger

TMI Tuesday blog

A confessional where people come to reveal too much information--sexy secrets, dirty deeds, and more.

The Big Gay Review

A Sexual Health and Toy Review Blog

Hesnaked.com

Sex toy reviews and other stuff from a male point of view.

Always the Little Spoon

Reviews and Musings of a Sex Toy Junkie

Ali's Addiction

Just another WordPress.com site

Thorough. Honest. Fair.

Property Of Potter

Honest opinions, personal experiences, sexual exploration...

Toy Meets Girl

Sex Toy Reviews and More | All truth. No Bullshit.

TJ's Take

A Freak For Sex Toys & Candy.

Where intelligence meets sexy

Mr. Will's House Of Thrills

One man's perspective on life and the things he encounters.

Oh Joy Sex Toy

A Sex Toy Comic Review Site

Searah's Museum of Screwy Sex Toys

Things I find that are crazy, scary & just down right wrong

Gritty Woman

Your guide to a kinkier sex life.

Cara Sutra

The Best Sex Blog & Sexuality Magazine

Dangerous Lilly

Brutally honest sex toy reviews and guides.

The Redhead Bedhead

Saving the World From Mediocre Sex

Ruffled Sheets

Thorough. Honest. Fair.

Hey Epiphora

Conquering the world one sex toy at a time

Follow

Get every new post delivered to your Inbox.

Join 472 other followers

%d bloggers like this: